ASNT2032-MBL


ASNT2032-MBL View full size
  • Digital demultiplexer (DMUX) 12-to-24 with LVDS output interface
  • Programmable LVDS/CML/ECL input interface
  • Supports data rates from 1.0Mbps to 3.6Gbps
  • Preset function for synchronization of multiple parallel devices
  • Two pairs of clock divided-by-2 and synchronous clock enable outputs for supporting a tree-type demultiplexation structure
  • Selectable clock divided-by-4 or divided-by-2 output
  • Power supply of +3.3V
  • Industrial temperature range
  • Low power consumption of 924mW at 3.6Gbps
  • Available in custom 256-pin BGA package (13mm x 13mm x 2.5mm)

Function Operating Frequency Power, mW Package
12:24 LVDS-LVDS Demultiplexer 1.0 Mbps-3.6 Gbps 924 256-pin BGA

DESCRIPTION

Fig. 1. Functional Block Diagram

ASNT2032-MBL is a broadband multichannel digital deserializer/demultiplexer (DMUX) 12-to-24 with an external initial preset function, selectable LVDS, CML or ECL input interface, and LVDS output interface. The part  also features selectable clock divided-by-2 or clock divided-by-4 outputs with multiple phases. The latter is intended for DDR interface support.

 

The operational speed of the DMUX is defined by an external clock signal (cip/cin) that is converted into required timing signals by the internal divider. The divider can be preset to a certain initial state by an external active-low reset signal (rnp/rnn), which allows synchronization of multiple DMUX devices operating in parallel. The reset signal is retimed inside the chip by the external clock and its positive edge must satisfy the timing shown in Fig. 3 within the part's datasheet. The position of the reset signal’s negative edge is not important. This part also supports cascaded tree-type structures as shown in Fig. 5 within the part's datasheet, by supplying two synchronous copies of clock divided-by-2 (co1p/co1n and co2p/co2n) and clock enable (rno1p/rno1n and rno2p/rno2n) signals. The  IC uses one positive power supply vcc = +3.3V and is characterized for operation from −25°C to 125°C of junction temperature.