ASNT5071-PQC View full size
  • Broadband (DC-17Gbps/DC-10GHz) tunable data/clock phase shifter
  • Delay adjustment range of 320ps
  • Exhibits low jitter and limited temperature variation over industrial temperature range
  • 100MHz of bandwidth for the phase adjustment tuning ports
  • Fully differential CML input interfaces
  • Fully differential CML output interface with 600mV single-ended swing
  • Single +3.3V or -3.3V power supply
  • Power consumption: 1.44W
  • Fabricated in SiGe for high performance, yield, and reliability
  • Standard MLF/QFN 24-pin package

Function Operating Frequency Power, mW Package
Clock / Data Phase Shifter with 320ps Delay Variation DC-17 Gbps / DC-10 GHz 1435 24-pin QFN


Fig. 1. Functional Block Diagram

ASNT5071-PQC is a data / clock variable delay line fabricated in SiGe technology.   The IC shown in Fig. 1 provides an adjustable delay of its differential output signal outp/outn in relation to its broadband input signal ip/in. The delay adjustment range is temperature-stabilized. The delay is controlled through a wide-band differential tuning port icntp/icntn.


The part’s I/Os support the CML logic interface with on chip 50Ω termination to vcc and may be used differentially, AC/DC coupled, single-ended, or in any combination. In the DC-coupling mode, the input signal’s common mode voltage should comply with the specifications shown in the electrical characteristics section within the part's datasheet. In the AC-coupling mode, the input termination provides the required common mode voltage automatically. The differential DC signaling mode is recommended for optimal performance.